ALF-PT20 - PowerTector 20amp Continuous

The device works to ensure that there is always sufficient voltage remaining in the battery to start a vehicle engine or ensure power is available for other critical applications.

In addition the PT-T versions offer a timed facility. This will disconnect the output after a set time after the ignition has been turned off.

Product Specification:

• Input voltage range: 9-32Vdc (Automatic Referencing)
• Output voltage: Equal to input voltage when operating (maximum of 100mV drop across terminals)
• Quiescent current when shutdown (while running): Typ 2mA @ 13.6V
• Electrostatic voltage protection: Meets ISO10605, ISO14982, >8kV contact, 15kV discharge
• Operating temperature: -25�C to +60�C to meet this specification table
• Storage temperature: -25�C to +100�C
• Ingress protection: IP65
• Casework: Silver anodised aluminium, glass filled polycarbonate
• Output indicator: Green LED for programming and output indication
• Over current: Limited by current sensing circuit
• Over heat: Limited by temperature sensing circuit
• Transients: Protected by filters and rugged component selection
• Catastrophic protection: Set by external input fuse (set by application demands) and ground line fuse max 1A
• Approvals: 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive
• Designed to: EN50498, ISO 7637-2
• Markings: CE and E (automotive) marked