PowerVerter 24VDC – 12VDC isolated Voltage Converters for when your application requires a different, stable output voltage from your onboard system.
Reference: Isolated Voltage Converters
This product offers a convenient way to operate 12Vdc equipment such as mobile phones, in car entertainment, professional communications, telematics equipment etc from the 24Vdc mobile electrical systems.
They have been optimized for high volume 24Vdc to 12Vdc applications such as on heavy goods vehicles, coaches, buses, forestry and agricultural, commercial vehicles.
These units are isolated, offering increased protection.
Input voltage range: 17-32Vdc
Output: 6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.
Intermittent output power: As stated, taken for a maximum of 2 minutes followed by 8 minutes rest.
Transient voltage protection: Meets ISO7637-2 International standard for 24Vdc commercial vehicles
Electrostatic voltage protection: Meets ISO10605, ISO14892, >8kV contact, 15kV discharge
Output noise: <50mV pk-pk at continuous load. Meets CISPR25
Off load current (quiescent current): <15mA
Power conversion efficiency: Typically: 90% for non-isolated units, 85% for isolated units, *95%
Isolation: >400Vrms between input, output and case, on isolated products only
Operating temperature: -25ºC to +30ºC to meet this specification table
Storage temperature: -25ºC to +100ºC
Operating humidity: 95% max., non-condensing
Casework: Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533
Connections: Four 6.3mm push-on flat blade connectors, *5 way Phoenix connector including enable on/off terminal and mating half
Output indicator: Green LED adjacent to output terminals
Mounting method: ‘Click ‘n’ fit mounting clip, fitted separately using three hole fixture, *4 hole cradle
Safe area protection: Over current Limited by current sensing circuit
Over heat: Limited by temperature sensing circuit
Transients: Protected by filters and rugged component selection
Catastrophic failure: Protected by internal input and output fuses
Approvals: 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive
Designed to: EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B